BT830 Series Bluetooth Module

Not Recommended for New Design (NRND)

Overview

The BT830 series of UART HCI modules are a complement to Ezurio's (formerly Laird Connectivity) original dual-mode Bluetooth v4.0 offerings (BT800 series), bringing support for Classic Bluetooth and Bluetooth Low Energy (LE) in a tiny footprint. Leveraging the market-leading CSR 8811 chipset, the BT830 series provides exceptionally low power consumption with outstanding range. Supporting the latest Bluetooth v4.0 Specification with EDR (Enhanced Data Rate), the Laird Connectivity BT830 series enables OEMs to accelerate their development time for leveraging either Classic Bluetooth or Bluetooth LE into their operating system-based devices.

Additionally, Ezurio has partnered with SEARAN for support of their ultra small, flexible ‘dotstack’ platform for embedded Cortex M3 and M4 implementations. 

Specifications

Bluetooth Version
V4.0 Dual Mode
Chipset
CSR 8811
Antenna Options
Integrated or External via Trace Pad
BT Class
Class 1
Certifications
FCC, ISED, EU, UKCA, MIC, Bluetooth SIG
Compliance
Lead-free and RoHS compliant
Data Rate
Up to 3 Mbps (over the air)
Dimension (Height - mm)
13 mm
Dimension (Length - mm)
8.5 mm
Dimension (Width - mm)
1.6 mm
Logical Interfaces
UART (TX, RX, CTS, RTS), GPIO (6 configurable lines)
Operating Temp (Max) (°C)
+85 °C
Operating Temp (Min) (°C)
-30 °C
Range
Circa 100 meters
Receive Sensitivity
-89dBm
Storage Temp (Max) (°C)
+85
Storage Temp (Min) (°C)
-40
Transmit Power (Max)
+7 dBm from antenna
+7 dBm from trace pin
Wi-Fi Coexistence
3 wire CSR schemes supported (Unity-3 and Unity-3e)
Part NumberAntenna OptionsAntenna TypeBluetooth VersionChipset (Wireless)ComplianceConnectorData RateDevelopment Kit ContentsDimension (Height - mm)Dimension (Length - mm)Dimension (Width - mm)Frequency Range (Max)Frequency Range (Min)Input PowerLogical InterfacesOS/SoftwarePower ConsumptionPower Consumption (Rx)Power Consumption (Tx)Product TypeProtocolsRangeReceive SensitivitySystem ArchitectureTechnologyTransmit Power (Max)WeightWireless Specification
BT830-SA-01-T/R
Not Recommended for New Design (NRND)
Buy Now
Internal v4.0 Dual Mode QCA (CSR) 8811 FCC, ISED, EU SMT Up to 3 Mbps Development board and software tools 1.6 mm13 mm8.5 mm2480 MHz2402 MHz3.0 - 3.6V USB, GPIO, I2S, PCM, Serial HCI 7.1 mA 7.1 mA 7.1 mA Embedded Module AT Command Set 100 meters -89dBm Hosted Bluetooth 4.0, Dual Mode (Classic + BLE) +7 dBm < .035 oz (< 1g) Bluetooth v4.0 Classic
BT830-ST
Not Recommended for New Design (NRND)
Buy Now
Trace Pin External v4.0 Dual Mode QCA (CSR) 8811 FCC, ISED, EU SMT Up to 3 Mbps Development board and software tools 1.6 mm13 mm8.5 mm2480 MHz2402 MHz3.0 - 3.6V USB, GPIO, I2S, PCM, Serial HCI 7.1 mA 7.1 mA 7.1 mA Embedded Module AT Command Set 100 meters -89dBm Hosted Bluetooth 4.0, Dual Mode (Classic + BLE) +7 dBm < .035 oz (< 1g) Bluetooth v4.0 Classic
BT830-SA
Not Recommended for New Design (NRND)
Buy Now
Internal v4.0 Dual Mode QCA (CSR) 8811 FCC, ISED, EU SMT Up to 3 Mbps Development board and software tools 1.6 mm13 mm8.5 mm2480 MHz2402 MHz3.0 - 3.6V USB, GPIO, I2S, PCM, Serial HCI 7.1 mA 7.1 mA 7.1 mA Embedded Module AT Command Set 100 meters -89dBm Hosted Bluetooth 4.0, Dual Mode (Classic + BLE) +7 dBm < .035 oz (< 1g) Bluetooth v4.0 Classic
BT830-SA-01
Not Recommended for New Design (NRND)
Buy Now
Internal v4.0 Dual Mode QCA (CSR) 8811 FCC, ISED, EU SMT Up to 3 Mbps Development board and software tools 1.6 mm13 mm8.5 mm2480 MHz2402 MHz3.0 - 3.6V USB, GPIO, I2S, PCM, Serial HCI 7.1 mA 7.1 mA 7.1 mA Embedded Module AT Command Set 100 meters -89dBm Hosted Bluetooth 4.0, Dual Mode (Classic + BLE) +7 dBm < .035 oz (< 1g) Bluetooth v4.0 Classic
DVK-BT830-ST
Not Recommended for New Design (NRND)
Buy Now
External v4.0 Dual Mode QCA (CSR) 8811 FCC, ISED, EU USB Pluggable Up to 3 Mbps Development board and software tools 1.6 mm13 mm8.5 mm2480 MHz2402 MHz3.0 - 3.6V USB, PCM, PIO SDK and Software Tools 7.1 mA 7.1 mA 7.1 mA Development Kit AT Command Set 100 meters -89dBm Hosted Bluetooth 4.0, Dual Mode (Classic + BLE) +7 dBm < .035 oz (< 1g) Bluetooth v4.0 Classic
BT830-ST-01-T/R
Not Recommended for New Design (NRND)
Buy Now
Trace Pin External v4.0 Dual Mode QCA (CSR) 8811 FCC, ISED, EU SMT Up to 3 Mbps Development board and software tools 1.6 mm13 mm8.5 mm2480 MHz2402 MHz3.0 - 3.6V USB, GPIO, I2S, PCM, Serial HCI 7.1 mA 7.1 mA 7.1 mA Embedded Module AT Command Set 100 meters -89dBm Hosted Bluetooth 4.0, Dual Mode (Classic + BLE) +7 dBm < .035 oz (< 1g) Bluetooth v4.0 Classic
DVK-BT830-SA
Not Recommended for New Design (NRND)
Buy Now
Internal v4.0 Dual Mode QCA (CSR) 8811 FCC, ISED, EU USB Pluggable Up to 3 Mbps Development board and software tools 1.6 mm13 mm8.5 mm2480 MHz2402 MHz3.0 - 3.6V USB, PCM, PIO SDK and Software Tools 7.1 mA 7.1 mA 7.1 mA Development Kit AT Command Set 100 meters -89dBm Hosted Bluetooth 4.0, Dual Mode (Classic + BLE) +7 dBm < .035 oz (< 1g) Bluetooth v4.0 Classic
DVK-BT830-SA-01
Not Recommended for New Design (NRND)
Buy Now
Internal v4.0 Dual Mode QCA (CSR) 8811 FCC, ISED, EU USB Pluggable Up to 3 Mbps Development board and software tools 1.6 mm13 mm8.5 mm2480 MHz2402 MHz3.0 - 3.6V USB, PCM, PIO SDK and Software Tools 7.1 mA 7.1 mA 7.1 mA Development Kit AT Command Set 100 meters -89dBm Hosted Bluetooth 4.0, Dual Mode (Classic + BLE) +7 dBm < .035 oz (< 1g) Bluetooth v4.0 Classic

Documentation

Name Part Type Last Updated
Application Note - BT830 BCCMD tool on Linux.pdf All Application Note 01/17/2019
Application Note - BT830 UART HCI Module for Big Windows-BtCLI Tool.pdf All Application Note 01/17/2019
Application Note - BT830 Configuration File for BooTpatch.pdf All Application Note 01/17/2019
RoHS 3 - Bluetooth All Certification 01/11/2024
Software Integration Guide - BT830 Using the Laird BooTpatch for Configuration.pdf All Documentation 01/17/2019
BT830 SA 3D Models - Solidworks.ZIP All Documentation 01/23/2019
BT830 ST 3D Models - Solidworks.ZIP All Documentation 01/23/2019
DVK-BT830 Schematic v01.pdf All Documentation 01/17/2019
Hardware Integration Guide - BT830 Development Kit.pdf All Documentation 01/17/2019
Product Brief - BT830.pdf All Product Brief 10/11/2021
Datasheet - BT830 All Datasheet 02/02/2021
BT830 WM65 1 0 0 7.cab All Software 01/17/2019
BT830 - ST 3D Models and Drawings.zip All Software 01/17/2019
BT830 WM5 LBT 1 0 0 7.zip All Software 01/17/2019
BT830 WM5 1 0 0 7.zip All Software 01/17/2019
BT830 WM65 LBT 1 0 0 7.zip All Software 01/17/2019
BT830 WM65 1 0 0 7.zip All Software 01/17/2019
BT830 WEC7 1 0 0 7.zip All Software 01/17/2019
BT830 WEC7 LBT 1 0 0 7.zip All Software 01/17/2019
BT830 CE5 LBT 1 0 0 7.zip All Software 01/17/2019
BT830 CE5 1 0 0 7.zip All Software 01/17/2019
BT830 CE6 LBT 1 0 0 7.zip All Software 01/17/2019
BT830 CE6 1 0 0 7.zip All Software 01/17/2019
BT830 Development Kit Schematics.pdf All Software 01/17/2019
BT830 - SA 3D Models and Drawings.zip All Software 01/17/2019
BT830 Configuration Files 0.zip All Software 01/17/2019
Bluetooth Development Kit Terminal Download.zip All Software 01/17/2019
BT830 ST.ZIP All Software 01/23/2019
BT830 SA.ZIP All Software 01/23/2019
BT830 CE6 LBT 1 0 0 7.zip All Software 01/17/2019
BT830 CE6 LBT 1 0 0 7.cab All Software 01/17/2019
BT830 CE6 1 0 0 7.zip All Software 01/17/2019
BT830 CE6 1 0 0 7.cab All Software 01/17/2019
BT830 CE5 LBT 1 0 0 7.zip All Software 01/17/2019
BT830 CE5 LBT 1 0 0 7.cab All Software 01/17/2019
BT830 CE5 1 0 0 7.zip All Software 01/17/2019
BT830 CE5 1 0 0 7.cab All Software 01/17/2019
BT830 WEC7 LBT 1 0 0 7.zip All Software 01/17/2019
BT830 WEC7 1 0 0 7.zip All Software 01/17/2019
BT830 WM65 LBT 1 0 0 7.zip All Software 01/17/2019
BT830 WM65 1 0 0 7.zip All Software 01/17/2019
BT830 WM65 1 0 0 7.cab All Software 01/17/2019
BT830 WM5 LBT 1 0 0 7.zip All Software 01/17/2019
BT830 WM5 LBT 1 0 0 7.cab All Software 01/17/2019
BT830 WM5 1 0 0 7.zip All Software 01/17/2019
BT830 WM5 1 0 0 7.cab All Software 01/17/2019
Application Note - Guidelines for Replacing Antennas v1.0 All Application Note 01/17/2019
PCN 10B-2018 All Documentation 05/20/2019
EU Certifications - BT830 All Certification 12/01/2022
FCC Certifications - BT830 All Certification 10/05/2020
ISED (Canada) Certifications - BT830 All Certification 10/05/2020
MIC (Japan) - BT830 All Certification 10/05/2020
Regulatory Information - BT830 All Certification 03/17/2023
PCN 8C-2021 - BT800/820/830 All Documentation 09/01/2021

FAQ

How can I connect a Bluetooth Low Energy Device to a PC?

Bluetooth Low Energy uses Services as opposed to the set of standardized profiles that exists for Classic Bluetooth. While some Bluetooth Low Energy services have been standardized by the Bluetooth SIG, the development of custom services is allowed to meet custom application requirements.
 
Because Bluetooth Low Energy uses a completely different protocol than Classic Bluetooth and supports custom services, Bluetooth Low Energy devices cannot connect to a computer through the typical Bluetooth configuration of a computer. Therefore, connecting to a PC requires writing and running a Bluetooth Low Energy Central Role/Client application to collect the data sent from the Bluetooth Low Energy peripheral modules. Application development for PCs and Mobile devices is outside the scope of our support. Alternatively, a BL654 USB dongle could be used as a BLE Central Role device, to collect the BLE data and pass it to the PC over a COM Port. However, you would still need an application to view and process the data received over that COM Port.
 
We generally recommend customers who are new to Bluetooth Low Energy obtain a copy of Getting Started with Bluetooth Low Energy to help them understand the Bluetooth Low Energy protocol and the GATT table. There are also many resources available online which explain this. 

When Bluetooth Low Energy was first introduced and we launched our BL6xx product line (predecessors to the BL65x series) we produced the BL600 and BL620 smartBASIC Application Walkthrough document, which provides an overview of how Bluetooth Low Energy works and how a GATT table is constructed. 

Can I use a BT850/860 in the place of an existing BT800/830?

Yes, the following modules share the same pin layout:

BT800 --> BT850
BT830 --> BT860

There are some No Connect (NC) pins on the BT850/860

Is it safe to run a Ezurio Bluetooth module through a PCBA wash cycle?

In general, cleaning the populated modules is strongly discouraged. Residuals under the module cannot be easily removed with any cleaning process. 

  • Cleaning with water can lead to capillary effects where water is absorbed into the gap between the host board and the module. The combination of soldering flux residuals and encapsulated water could lead to short circuits between neighboring pads. Water could also damage any stickers or labels.
  • Cleaning with alcohol or a similar organic solvent will likely flood soldering flux residuals into the RF shield, which is not accessible for post-washing inspection. The solvent could also damage any stickers or labels.
  • Ultrasonic cleaning could damage the module permanently.

However, if water washing is required you will need to use deionized water. We do not recommend chemical cleaning and cannot guarantee it will not damage the modules. If you MUST clean PCB with chemicals it is recommended that you test on one board and then confirm the module still works after the process, prior to adding it to production, while understanding the above affects washing the populated PCBs can have on the module.

BT8xx and HID Proxy Mode: As a customer, what equipment do I need to enable HID mode?

A programming jig can be used for loose modules (BT800/BT810). You should consider obtaining the CSR-SPI adaptor although a USB interface also works. If the modules need to first be soldered to your PCB, the USB/SPI interface should be externally available to a PC. The programming PC should be running the Windows 8 operating system.

BT8xx and HID Proxy Mode: Is Windows 8 the only way to program the BT8xx?

You can use Windows 7 to run CSR Pstools to enable HID proxy mode. But you cannot do it for a second time because Windows 7 does not ‘switch’ to HCI mode. HCI mode is required to run the Pstools over a USB interface.

BT8xx and HID Proxy Mode: Will the BT8XX work with my BT keyboard and mouse?

This depends on your computer’s operating system and in which mode you have the BT8xx configured.

If the BT8xx is configured in HID mode, it will work with the following:

BLE Keyboard and Mouse in Computer BIOS screen

BLE Keyboard and Mouse in Windows 8

Classic BT HID keyboard and mouse in Windows 8

If the BT8xx is configured in HCI mode, it will work with the following:

Classic BT HID keyboard and mouse in Windows 8

BLE Keyboard and Mouse in Windows 8

Classic BT HID keyboard and mouse in Windows XP and 7.

What is the recommendation for washing BT/BLE modules?

We recommend using de-ionized water. Additionally, we recommend avoiding any sonic vibration, heat, and pressure washing as well as any other soaps/chemicals.

HCI module of BLE support for WinCE?

Even though the module HW supports BLE, you still need the host BT stack to support it. Windows CE only supports Classic BT, but not BLE. Customer should consider built-in stack module such as BT900.  

hcitattach command no longer works?

I have migrated bluez libraries from 4.x to 5.x, in order to get BLE support. But I could no longer hcitattach the serial HCI module. BlueZ has introduced the btattach command in release 5.37, as the successor to hciattach, and command syntax is quite different. Please check BlueZ manual for details.  

Can I use the Manufacturer's Specific AD record Data Type for Proprietary Data?

The Manufacturer's Specific Data Type is used for manufacturer specific data which can be proprietary data structures defined by the manufacturer and only identifiable by manufacturer's equipment/applications. To use the Manufacturer's Specific Data Type you need to have a Company Identifier as assigned by the BT SIG. You must be a registered member of the BT SIG and must apply for the company identifier using the process below (found at this link: https://www.bluetooth.com/specifications/assigned-numbers/company-ident…)   Application & Assignment Process Submit the following below to  Bluetooth Support : Company information (legal name of company) Name of company's primary contact (name and email) A statement that your company is currently a Bluetooth SIG member in good standing* Please allow five business days for your request to be fulfilled, and two business days from the time your request is fulfilled to view your Company Identifier on this page. *  ? BLUETOOTH Member in Good Standing ? shall mean any firm, corporation or other legal entity that has been admitted to membership in the BLUETOOTH SIG, whether a Promoter Member, Associate Member or Adopter Member, as defined in the organizational documents, that has fulfilled all of the requirements for membership, has paid and is current with payment of any and all membership fees, dues and assessments, and whose membership neither has been voluntarily or involuntarily suspended, terminated, or withdrawn from membership consistent with the lawful provisions of the organizational documents of the BLUETOOTH SIG.?

Who is responsible for providing the Bluetooth QDID for a host system?

The responsability for providing the QDID for a host system is with the provider of the stack that is used on that system. If for instance the host system uses a module that requires the Bluetooth stack to run on that system (e.g. Lairds Sterling-LWB in a Linux platform) the QDID must be provided by the stack vendor whos stack is running on that Linux platform. Challenges might occur when an open-source, community based stack is used. If a module with integrated stack us used (e.g. Lairds BL652) the QDID is provided by the module vendor.  

 

 

Can I retrieve a BTADDR from an HID connection even in smartBASIC?

Currently you are unable to retrieve a BTADDR from a HID connection event with smartBASIC however an extension is planned for a future firmware update release which will include this functionality.  

What criteria should be confirmed when soldering Bluetooth modules?

The factors to confirm when checking the soldering job on Bluetooth modules are solder stencil aperture size, solder stencil thickness, solder ball size, solder type, and the MSL guidelines. If the parts have been left out for too long then the modules should be baked to remove any moisture prior to soldering. If there are any failures, we highly recommend providing an x-ray of the module.

Does Ezurio provide 3D files for modules?

Ezurio provides 3D files (STEP) files for most but not all of it's modules.  Based on the nature of the information in the files, in most cases Laird requires a login to access these files as well as layout files and software/firmware downloads.  As such, for most modules, the 3D files are found under the Software Downloads tab of the product page.  The page offers a credentials request link for customers who need credentials.  In most cases, the credentials are provided via return email within about 10 minutes. Please contact support if you have any additional questions or have any issues accessing our downloads.

Do we recommend conformal coating your modules?

We highly do not recommend conformal coating the radio module. If you plan on encapsulating the radio module in a potting compound or conformal coating, you must assure that the compound in liquid or solid form does not enter under the shield where there are sensitive RF components. Some of the capacitive and inductance values are as low (pF and nH) and could be sensitive to contacting materials such as potting compounds. There are potting compounds and conformal coatings which have very good dielectric constants and are suitable for 2.4 GHz potting applications, however, when you apply any of these, they were not accounted for in the circuit design and might reduce performance of the device (or all together cause it not to function).  You should run tests on their particular potting compound and evaluate radio's performance and range.  Also, it's worth mentioning that applying any compound, conformal coating or potting directly to the module WILL void the warranty. If your application requires 100% sealing of the radio module, there is a way to do this very successfully without impacting the module performance. Simply place the module on your PCB. Place a plastic cover over the module (like a hat), make the cover large enough to cover the whole module. Apply glue around the bottom perimeter of the cover where it sits on the PCB. This allows the module to function in free air-space while there is a complete seal around it. This information is only for reference and we recommend you should conduct your own testing with your prototype of your end application to find the best suitable fit for your design.  

How many reflows do you recommend for your modules?

We only recommend reflowing our modules once as it can damage the module and void the warranty.

Are Laird's BT/ BLE Modules "Intrinsically Safe"?

Yes it is possible that Laird's BLE modules could be utilized in a end device that is certified as"Intrinsically Safe". We do not currently have any end customers doing this with all of Laird's BT/BLE modules, some of our BT/BLE modules have been successfully certified by our customers. As a valuable point of information, Intrinsically Safe certifications are detailed and extensive, requiring NDA restricted information on our modules which we can support based on the commercial opportunity. The detailed analysis and testing of the end production solution is the responsibility of the end customer working with their certified test house. 

What are the available CAD file formats?

Ezurio provides layout files PADS and PADS ASCII formats. The ASCII files will import to Altium (and Protel varients) as well as Cadence (Orcad and Allegro) CAD packages. As far as we know, there is no way to import to Eagle CAD. Please be sure to use the .asc file for PCB and the .txt file for the schematic when importing to Altium. Ezurio uses ORCAD for schematics (Gerbers). 

What's the recommended process to clean modules?

The recommended cleanser is "hydrocarbon cleaning oil", which can be used to clean the RF shield and PCB. We do not recommend the use of alcohol as it doesn't work as well and could leave residue on the boards.  

Can the BT830 use HCI over H4?

Yes, but you need to send the following over BCSP # PSKEY_HOST_INTERFACE UART link running H4 psset 0x01f9 0x0003 psset 0x01C0 0x08a8 sleep 300 H4 will then become active after a soft reset. Note that this configuration data will be lost after a power cycle. This means these configuration commands need to be sent over BCSP each time the module powers up.

Is there any BT stack available for the BT800/820/830 module?

For HCI modules, We are partnering with Searan for the BT stack. Customers can contact Laird regional Sales/FAE for contact information.

Can I use BT800/BT820/BT830 for audio application?

These are HCI modules. You will need a host MCU and have some sort of BT stack on the MCU side. We are partnering with Searan, and they have BT stack which can operate on these modules for audio application.

I have a BT800, and I know Laird supplies a MAC address (0016A4XXXXXX), but the host returns a different MAC starting with (00 24 5B XXXXXX)?

Check your schematic and the HIG. It is probably "VDD_PADS" not being powered properly. It is the power rail of alI I/O pads including the EEprom. The MAC address is stored in the EEprom.

Become a Ezurio Customer and Gain Exclusive Access to Our Design Services Team

  • Antenna Scans
  • Antenna selection and placement
  • Custom antenna design
  • Worldwide EMC testing / certifications
  • Embedded RF hardware / firmware design
  • Cloud architecture and integration
  • Mobile application development
  • Product & Industrial Design

Talk to an Expert

Buy Now

Distributor Part In Stock Region Buy
Future Electronics BT830-SA 0 North America Buy Now
Mouser BT830-SA 0 North America Buy Now
DigiKey BT830-SA-01 134 North America Buy Now
Avnet BT830-SA-01 0 North America Buy Now
Avnet BT830-SA-01 0 North America Buy Now
Symmetry Electronics BT830-SA-01 0 North America Buy Now
Avnet BT830-SA-01-T/R 0 North America Buy Now
DigiKey BT830-SA-01-T/R 0 North America Buy Now
Symmetry Electronics BT830-SA-01-T/R 0 North America Buy Now
Future Electronics BT830-ST 578 North America Buy Now
DigiKey BT830-ST 88 North America Buy Now
Avnet BT830-ST 0 North America Buy Now
Avnet BT830-ST-01-T/R 0 North America Buy Now
DigiKey BT830-ST-01-T/R 0 North America Buy Now
Symmetry Electronics BT830-ST-01-T/R 0 North America Buy Now
Future Electronics DVK-BT830-SA 0 North America Buy Now
Mouser DVK-BT830-SA 0 North America Buy Now
Farnell DVK-BT830-SA-01 1 EMEA Buy Now
Avnet DVK-BT830-SA-01 0 North America Buy Now
Avnet DVK-BT830-SA-01 0 North America Buy Now
DigiKey DVK-BT830-SA-01 0 North America Buy Now
Mouser DVK-BT830-SA-01 0 North America Buy Now
Symmetry Electronics DVK-BT830-SA-01 0 North America Buy Now
Future Electronics DVK-BT830-ST 0 North America Buy Now

Distributors

Distributor Phone Number Region Website
Alpha Micro UK Only +44 1256-851770
EMEA Website
Arrow Electronics 1-855-326-4757
+44 2039 365486
APAC, North America, South America, EMEA Website
Avnet 1-480-643-2000
+44 1628 512900
APAC, North America, South America, EMEA Website
Braemac Australia, New Zealand, South East Asia +61 2 9550 6600
+64 9 477 2148
APAC Website
Cal-Chip Connect 1-215-942-8900
North America Website
DigiKey 1-800-344-4539
North America, South America, APAC, EMEA Website
EBV Elektronik EMEA Website
Farlink Technology China, Hong Kong +86 13266922199
APAC Website
Farnell 1-800-936-198
+44 3447 11 11 22
EMEA Website
Future Electronics 1-800-675-1619
1-514-428-8470
North America, South America, APAC, EMEA Website
Glyn +49-6126-590-0
EMEA Website
Jetronic China, Hong Kong and Taiwan 852-27636806 
APAC Website
Laird Connectivity 1-847-839-6925
+44 1628 858941
North America, South America, APAC, EMEA Website
M2M Germany +49-6081-587386-0
EMEA Website
Martinsson +46 8 7440300
EMEA Website
McCoy South East Asia +65 6515 2988
APAC Website
Mouser 1-800-346-6873
+44 1494 427500
North America, South America, APAC, EMEA Website
RS Components +852-2421-9898
+44 3457-201201
North America, South America, APAC, EMEA Website
Ryoyo Japan +81-3-3543-7711
APAC Website
Solsta UK Only +44 (0) 1527 830800
EMEA Website
Supreme Components International India, South East Asia +65 6848-1178
APAC Website
Symmetry Electronics 1-866-506-8829
North America Website
Tekdis Australia and New Zealand +61 3 8669 1210
APAC Website
Telsys +972 3 7657666
EMEA Website
WPG +44 1628 958460
EMEA Website