Fingerstock

Engineered metal Fingerstock solutions from Laird dates from 1938. Laird specializes in designing miniature

parts of thin strip metal in quantities ranging from thousands of pieces to millions of pieces. With over 3,400 standard parts, Laird probably already has an off-the-shelf solution that meets your application’s requirements.

 

When custom designs are needed, Laird engineering staff helps construct efficiencies in performance, cost and

manufacturability from the very beginning stages of the application.

Laird specialized capabilities:

 

• Assembly • Heat staking (both hand and automatic)

• Heat treating • In-house die and fixture manufacturing

• Multislide equipment • Photoetching

• Plating • Progressive die stamping

• Prototype fabrication • Resistance welding

• Riveting • Secondary fabrication

• Wire EDM

 

Laird's standard precision electronic contacts ground, carry current and signals, and interconnect boards and devices. A wide variety of plating options allow for the maximum electrical current carrying performance. An array of designs in a standard format are ready for production. Installed costs are lower with our tape and reel.

97-951 Symmetrical Slotted Shielding (S3)
97-951 Symmetrical Slotted Shielding (S3)

Series 97-951/954/957 are low compression adhesive mounted beryllium copper shielding...

Design Series
Symmetrical Slotted Shielding
Material
BeCu
Plating
Optional
Dimensions
0.62 x 0.22 in
97-954 Symmetrical Slotted Shielding (S3)
97-954 Symmetrical Slotted Shielding (S3)

Series 97-951/954/957 are low compression adhesive mounted beryllium copper shielding...

Design Series
Symmetrical Slotted Shielding
Material
BeCu
Plating
Optional
Dimensions
0.45 x 0.14 in
97-957 Symmetrical Slotted Shielding (S3)
97-957 Symmetrical Slotted Shielding (S3)

Series 97-951/954/957 are low compression adhesive mounted beryllium copper shielding...

Design Series
Symmetrical Slotted Shielding
Material
BeCu
Plating
Optional
Dimensions
0.35 x 0.11 in
97-958 Symmetrical Slotted Shielding (S3)
97-958 Symmetrical Slotted Shielding (S3)

Series 97-952/955/958 with the addition of an integral pierced brass track to provide...

Design Series
Symmetrical Slotted Shielding
Material
BeCu
Plating
Optional
Dimensions
0.35 x 0.11 in
97-952 Symmetrical Slotted Shielding (S3)
97-952 Symmetrical Slotted Shielding (S3)

Series 97-952/955/958 with the addition of an integral pierced brass track to provide...

Design Series
Symmetrical Slotted Shielding
Material
BeCu
Plating
Optional
Dimensions
0.62 x 0.22 in
97-955 Symmetrical Slotted Shielding (S3)
97-955 Symmetrical Slotted Shielding (S3)

Series 97-952/955/958 with the addition of an integral pierced brass track to provide...

Design Series
Symmetrical Slotted Shielding
Material
BeCu
Plating
Optional
Dimensions
0.45 x 0.14 in
97-645 Clip-On Series
97-645 Clip-On Series

This series from Laird is designed for use where high temperature or other design...

Design Series
Clip-on Series
Material
BeCu
Plating
Optional
Dimensions
0.21 x 0.07 in
97-650 Clip-On Series
97-650 Clip-On Series

This series from Laird is designed for use where high temperature or other design...

Design Series
Clip-on Series
Material
BeCu
Plating
Optional
Dimensions
0.98 x 0.40 in
97-438 Large Enclosure Shielding
97-438 Large Enclosure Shielding

These standard beryllium copper contact gaskets offer ideal RFI/EMI shielding of doors...

Design Series
Large Enclosure Series
Material
BeCu
Plating
Optional
Dimensions
1.09 x 0.25 in
95-828 "D" Connector Shield, Slotted
95-828 "D" Connector Shield, Slotted

The slotted D connector gaskets provide shielding for most 9 through 50 pin connectors...

Design Series
D Connector Shielding/Slotted
Material
BeCu
Plating
Optional
Dimensions
2.30 x 0.03 in
97-542 Foldover Series
97-542 Foldover Series

This version of Sticky Fingers beryllium copper shielding gaskets features a special U-...

Design Series
Foldover Series
Material
BeCu
Plating
Optional
Dimensions
0.25 x 0.08 x 16.00 in
97-827 "D" Connector Shield, Slotted
97-827 "D" Connector Shield, Slotted

The slotted D connector gaskets provide shielding for most 9 through 50 pin connectors...

Design Series
D Connector Shielding/Slotted
Material
Stainless Steel
Plating
Optional
Dimensions
2.28 x 0.03 in
97-772 "D" Connector Shield
97-772 "D" Connector Shield

Laird offers the "D" Connector Shield Series for grounding and shielding of D...

Design Series
D Connector Shielding/Slotted
Material
Stainless Steel
Plating
Optional
Dimensions
2.84 x 0.03 in
97-622 Clip-On Series
97-622 Clip-On Series

This series from Laird is designed for use where high temperature or other design...

Design Series
Clip-on Series
Material
BeCu
Plating
Optional
Dimensions
0.44 x 0.12 in
97-624 Clip-On Series
97-624 Clip-On Series

This series from Laird is designed for use where high temperature or other design...

Design Series
Clip-on Series
Material
BeCu
Plating
Optional
Dimensions
0.42 x 0.14 in
Hide Me