T-pcm™ 900 Series

Easy to Use, Low Thermal Resistance, Naturally Tacky Phase Change Material

T-pcm™ 900 Series is a high performance, non-electrically conductive phase change material. T-pcm™ 900 is a flexible solid at room temperature and freestanding without any reinforcing layer which would reduce thermal performance. T-pcm™ 900 is naturally tacky providing easy application. No additional adhesive is required, which would also reduce thermal performance.

At 50°C, T-pcm™ 900 begins to soften and flow filling the microscopic irregularities of both the thermal solution and the components surfaces, thereby reducing thermal interface resistance.

T-pcm™ 900 shows no thermal performance degradation after 1,000 hours @ 130°C, nor after 500 cycles, from -25°C to 125°C. T-pcm™ 900 uses a non-wax matrix whereby the material softens and does not fully change state, resulting in minimal migration (pump out).

T-pcm™ 900 is supplied in rolls with top tabbed liners for easy manual or large volume automatic application. Individual die cut parts can also be supplied

Features and Benefits

0.03ºC-in²/W thermal resistance
Naturally tacky; extremely easy to use
Stable and reliable
Available in three thicknesses; 0.005”, 0.010” & 0.020”(0.125mm, 0.25mm, & 0.50mm)

Applications

Microprocessors
Chipsets
Graphics processing units
Custom ASICS
Power components and modules

T-pcm™ 900 Series Product Tables

T-pcm™ 900 Series Product Tables and Testing Methods

Specification Sheets and Brochures