0.020” (0.51mm)
0.030” (0.76mm)
0.040“ (1.02mm)
0.050“ (1.27mm
0.060” (1.52mm)
0.070” (1.78mm)
0.080” (2.03mm)
0.090” (2.29mm)
0.100” (2.54mm)
0.110” (2.79mm)
0.120” (3.05mm)
0.130” (3.30mm)
0.140” (3.56mm)
0.150” (3.81mm)
0.160” (4.06mm)
0.170” (4.32mm)
0.180” (4.57mm)
0.190” (4.83mm)
0.200” (5.08mm)

Consult the factory for alternate thickness

Standard Sheets Sizes:

9” x 9” (229mm x 229mm) and 18" x 18" (457mm x 457mm).  9" x 9" only over 0.100" thickness.

T-flex™ 600 is available in individual die cut shapes.

Pressure Sensitive Adhesive:

Pressure sensitive adhesive is not applicable for T-flex™ products

Tacky One Side Only:

T-flex™ 600 is naturally tacky on both sides but can be provided tacky on one side only. This is indicated by the suffix "DC1". This option offers good separation properties allowing the tacky side to stick to the heatsink/chasis/cold plate/etc. and the other "dry" side to release easily from the component.

Reinforcement:

Fiberglass is required in 0.020”(0.51mm) and 0.030” (0.76mm)

Fiberglass is not an option in material thicknesses of 0.040”(1.02mm) and above