RAMP Modules

RAMP Modules for M2M applications

 

Range Amplified MultiPoint (RAMP) modules provide a no-compromise solution for machine-to-machine (M2M) applications required to transmit serial data, wirelessly over long distances with high reliability. RAMP modules utilize a Frequency Hopping Spread Spectrum (FHSS) technology to provide interference and multipath immunity for industrial applications. RAMP modules are capable of operating in a point to point or point to multipoint network and can support a virtually unlimited number of nodes in a network.

RAMP modules utilize two unlicensed Industrial, Scientific and Medical (ISM) bands from 902 Mhz- 928 MHz and 2.402 GHz – 2.4835 GHz. While specific frequency bands vary from country to country, in general the 900 MHz band is available for use in North America and Australia and on a restricted basis in Brazil. The 2.4 GHz band is considered worldwide, though approval in individual countries is still subject to restrictions. Laird Technologies also seeks FCC (United States), IC (Canada) and CE (Europe) approval for modules as appropriate, significantly lessoning the burden on the OEM developer.

RAMP modules meet requirements for industrial temperature ranges and a reliable wireless link for communication. The modules are ideal for M2M applications which require one-to-one or one-to-many communications over a long distance. A simple AT command set enables rapid prototyping and development with RAMP modules. By using this AT command set, an operator can set the configuration once, and then use that configuration automatically without additional input. Two RAMP modules can then act as a serial cable replacement or as part of a larger star network, without any additional programming.

Contact Laird Technologies today for your complete application solutions.

Statement of Compliance to EU WEEE Directive and RoHS Directive

Product Information

General Documentation
Statement of Compliance to EU WEEE Directive and RoHS Directive
RAMP Product Line 
 

Products

2.4Ghz RAMP Module- RM024   The RM024 is a globally accepted 2.4GHz Frequency Hopping Spread Spectrum module designed for serial to wireless communications for machine to machine applciations.		Product Brief Configuration Utility USB Drivers User Manual DVK User Manual V1.0 Integration Guide New Product Notice   Firmware Release Notes for version 1.3-0 RM024 Firmware V1.3-0  RM024 C Library Examples
915 MHz Wireless Module - LT1110   The LT1110 permits an unlimited number of clients to synchronize to a single server for low latency communications. Catalog		Product Brief Configuration Utility USB Drivers Firmware Release Notes LT1110 Wireless Module User Manual  Statement of Compliance to EU WEEE Directive and RoHS Directive LTxxxx v2.9.0.zip
2.4 GHz Wireless Module - LT2510   Globally-accepted module that exceeds most OEM application and performance requirements. Catalog		Product Brief Configuration Utility USB Drivers LT2510 Quick Start Guide LT2510 User Manual - End of Life Notice LT2510 DVK User Manual LT2510 FW 2.4-1 binary Image Release Notes for LT2510 FW 2.4-1  Statement of Compliance to EU WEEE Directive and RoHS Directive LTxxxx v2.9.0.zip
AC4790 - 900MHz Radio Module   Features a dynamic addressing scheme, which simplifies node-to-node communication. Catalog		Product Brief Configuration Utility USB Drivers AC4790 User Manual  Statement of Compliance to EU WEEE Directive and RoHS Directive
AC4490-1X1 - 900MHz Radio Module   Puts the power of wireless into the smallest, most cost-sensitive applications. Catalog		Product Brief Configuration Utility USB Drivers AC4490 User Manual AC4490 RF Diagnostic Suite Statement of Compliance to EU WEEE Directive and RoHS Directive
AC4424 - 2.4GHz Radio Module   Simplifies the OEM's design effort and assures successful field operation. Catalog    |  End Of Life		Product Brief AC4424 User Manual - End Of Life Notice Configuration Utility  USB Drivers
AC4490 - 900MHz Radio Module   Used as direct wire replacements which require no special host software for communication. Catalog		Product Brief Configuration Utility USB Drivers AC4490 User Manual AC4490 RF Diagnostic Suite Statement of Compliance to EU WEEE Directive and RoHS Directive
ConnexLink - Wireless Cable Replacement System   The most flexible and affordable RF serial data device available for both consumers and OEMs. Catalog		Product Brief Configuration Utility USB Drivers CL2510 User Manual - End Of Life Notice CL4424 User Manual - End Of Life Notice  CL4490 User Manual CL4790 User Manual ConnexNet User Manual  Statement of Compliance to EU WEEE Directive and RoHS Directive ConnexLink™ Product Line ConnexLink - Wireless Cable Replacement System ConnexNet - Wireless Systems - End of Life Notice ConnexLink USB - Wireless Systems ConnexLan - Wireless Systems
AC4486 - 868MHz Radio Module   Number of on-the-fly control commands that provide OEMs with a versatile interface. Catalog		Product Brief Configuration Utility USB Drivers AC4486 User Manual AC4868 User Manual - End Of Life Notice Statement of Compliance to EU WEEE Directive and RoHS Directive
AC4790-1X1 - 900MHz Radio Module   Enables communication with any other in-range transceiver for true peer-to-peer operation. Catalog		Product Brief Configuration Utility  USB Drivers
RAMP RF Development Kits   Provides a complete development environment to help integrate and test RF communication in a matter of minutes. Catalog		Product Brief Configuration Utility USB Drivers AC4490 RF Diagnostic Suite SDK User Manual

The PDF(s) above require Adobe Acrobat Reader for proper viewing. If you do not have Acrobat Reader, or would like to upgrade to the newest version, please click here.